Re: Clipsal

["Frank Mc Alinden" <armagh@xxxxxxx>]

Hi Brian + Keith
                       
The loop terminal on Clispal switch mechs is
generally used for the neutral wire as the feeds are usually looped
switch
to switch here in Aussie....

Frank
----- Original Message -----
From: "Keith Doxey" <lists.diyha@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Sunday, October 13, 2002 3:02 AM
Subject: RE: [ukha_d] Clipsal


> The 1 & 2 are the 2 positions of the switch.
>
> Press to make
> Press to break
>
> with respect to common.
>
> The "Loop" terminal should be just a terminal connected to
nothing where
you
> can join a couple of wires together.
>
> Verify the above with a multimeter.
>
> HTH
>
> Keith
>
> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> Sent: 12 October 2002 17:52
> To: Ukha_D (E-mail)
> Subject: [ukha_d] Clipsal
>
>
> Hi all, just installing some lighting wiring to DIN rails and come
across
a
> problem...
>
> I was going to use momentary switches to the DIN modules but I have
a
2-way
> stairs lights which I was going to remove and replace both cable runs
with
> 1mm mains cable but now I am undertaking the work I notice the clipsal
PTM
> switches have 4 connections, so now I am not sure if I need to replace
the
> original cable?
>
> I was going to connect the cable to the 1 and centre connectors but
as
there
> is a 2 and loop I am sure I can connect the 2-way cable to this some
how?
>
> Can anyone advise me or point me towards a wiring diagram for this
please?
>
> Thanks all,
>
> B.
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.