The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Clipsal


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 2 KAT5 Questions



As Tony says,

VGA is on the "ToDo" list.

I did consider a KAT5 SCART Plate but it would need two cable feeding it to
supply the AV signals and power to drive the electronics. It also goes
against the whole concept of CAT5 in that the flexibility offered by
structured cabling is lost by having a faceplate dedicated to a single
purpose.

I may put it back onto the "ToDo" list after VGA if there is sufficient
interest.

Keith

www.diyha.co.uk
www.kat5.tv


-----Original Message-----
From: BUTLER, Tony, FM [mailto:roaming@xxxxxxx]
Sent: 11 October 2002 11:01
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] 2 KAT5 Questions


> I have two questions on KAT5
>
> 1. Is there/or are there any plans to do a version of Kat5 to
> transmit VGA and Sound??

A VGA one is on the "to do" list ISTR.  It would use all available pairs
though, as per RGB, so you'd need a separate audio feed.

> 2. Would it be possible to take a KAT5 out of it's current case and
> shoe horn it into a very deep double socket back box?? It would help
> with the SWMBO apporval if there wasn't a box to be seen??

The SCART sockets are surface mounted, so you'd have a bit of frigging about
to do.  Without measuring them (no units here) I'd say they might be a bit
too big for a double socket box - however, there should be nothing stopping
you burying the unit and PSU in the wall and running fly leads to a double
socket with just an RJ45 and SCART socket on it.....

Maybe KAT5:Next Gen will be double socket mountable.....

Tony.


********************************************************************
      Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
The Royal Bank of Scotland is registered in Scotland No 90312
Registered Office: 36 St Andrew Square, Edinburgh EH2 2YB
Regulated by the Financial Services Authority
********************************************************************


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.