|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: Audiotron Wifi |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: DDAR
Sorry Mark, just getting time to look at the postings!
I have now moved all my kit into the loft conversion and by removing the
router from the system ALL is now working.
Thanks very much for your help
B.
-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 21 September 2002 13:33
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] DDAR
Ah - has thought....
Are you running a separate DHCP server on the network?
-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 20 September 2002 23:49
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] DDAR
Yes they have been moved and yes they are both Dell jobbies, I now have it
unplugged from the mains and the network, will try again in the morning,
and all because the power went off!
Thanks,
B.
-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 20 September 2002 23:35
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] DDAR
I assume that you've done the obvious thing and swapped them over
physically?
This would rule out whether it's a problem with that cable/network
port/whatever.
Are they both Dell-badged?
M.
-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 20 September 2002 23:29
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] DDAR
Hi Mark,
I am using the Ethernet connection, Server v1.03.
I always have problems with this unit never the other one.
Cheers,
B.
-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 20 September 2002 19:38
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] DDAR
Brian,
Which network are you using? Ethernet or HPNA?
Which server software are you using? The supplied stuff (if so, which
version), or JReceiver (again, if so, which version?)
Regards,
Mark
-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 20 September 2002 19:21
To: Ukha_D (E-mail)
Subject: [ukha_d] DDAR
Does anyone know a trick to force these to connect?
I have 1 unit that works first time every time and 1 that takes days!
The duff one I usually unplug the CAT5 cable and remove the power cable,
leave it for about a day then re connect the power and the network cable
and jobs a goodun but this time it is saying cannot find the server,
again.
Any ideas?
B.
Yahoo! Groups
Sponsor |
ADVERTISEMENT
|
|
|
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|