The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: More Plasma stuff!


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: More Plasma stuff!
  • From: "Rob Mouser" <rmouser@xxxxxxx>
  • Date: Mon, 4 Nov 2002 11:22:59 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Many thanks Tim.

What sort of cable do I need for a svideo connector?

Many thanks

Rob Mouser
rmouser@xxxxxxx rob@xxxxxxx

-----Original Message-----
From: Timothy Morris [mailto:timothy.morris@xxxxxxx]
Sent: 04 November 2002 11:22
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] More Plasma stuff!

The trouble with RGB is that you need to use the composite for sync and
the Panasonic won't let you connect both composite and svideo at the
same time.

The best bet will be to get an svideo switcher installed at node 0 and
pipe the feed though. 15m should be fine for native SVideo - I seem to
recall Phil running it over 20m.

You won't get any autoswitching with plasmas but if you are routing it
all through svid that doesn't matter.

The panasonic's svideo is very difficult to discern from the RGB

Tim

> -----Original Message-----
> From: Rob Mouser [mailto:rmouser@xxxxxxx]
> Sent: 04 November 2002 11:03
> To: Ukha
> Subject: [ukha_d] More Plasma stuff!
>
> Now my plasma purchase has been officially approved by SWMBO I am
trying
> to get my head around connection methods.
>
>
>
> I'm going for the Panasonic 37" unit. Whats the best connection method
> to get DVD and Tivo/Sky feed to the unit from node Zero. Noticed a few
> posts that suggest the Panasonic units can be a little troublesome in
> connection terms.
>
>
>
> Am I right in thinking that I could have:
>
>
>
> RGB Component for the DVD.
>
> 'S' Video for Tivo/Sky.
>
>
>
> Do the Panasonic plasma's switch dependant on sencing a signal
> automatically? Or can you select an input source from the remote?
>
>
>
> Many thanks
>
>
>
> Rob Mouser
>
> rmouser@xxxxxxx <mailto:rmouser@xxxxxxx>
>
> rob@xxxxxxx <mailto:rob@xxxxxxx>
>
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>





http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.