The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Network attached storage


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Network attached storage
  • From: "Don McAllister" <donmc@xxxxxxx>
  • Date: Fri, 17 May 2002 10:55:45 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Wow … Excellent, just what I needed. I have come to the same conclusion as matthew that I need to separate out my storage requirements into a single box. Toyed with Linux in the past but the webmin interface just brings it all together. Had my 1st samba share set up in 5 mins!!

 

Cheers

Don

 

-----Original Message-----
From: Chris Bond [mailto:chris@xxxxxxx]
Sent: 17 May 2002 10:07
To: ukha_d@xxxxxxx Subject: Re: [ukha_d] Network attached storage

 

I'd try redhat and just do a custom install - there is no reason not to have X on there whatsoever, failing that debian would work nice.

 

Also you might want to try http://www.webmin.com very nice for serveradmin for newbies that don't know much about the config files (yet!!)

 

Kind Regards,

Chris Bond

----- Original Message -----

Sent: Friday, May 17, 2002 9:58 AM

Subject: [ukha_d] Network attached storage

 

For a while now I've been toying with the idea of having a Network Attached Storage box hidden away somewhere on my LAN- to protect my data should anything happen to my main pc.  I've had servers in the past, but the hassle of having them on 24/7 or turning them on so I can get at my data has always been too much.

 

I've purchased a cyrix 180mhz set-top box machine from ebay for £21 (came with a 3.2 gig samsung that I then sold on ebay for £24!!!) and popped a 10 gig drive (just experimental) in it.

 

I've tried several configurations for this machine, all of which I'm not overly happy with.  My latest experiment is windows 98 lite to serve my lan, but I want a more elegant solution than that.

 

Before that I was using Red Hat 7.2 and Samba - but whenever I had to do any configuration on it I ended up having to run X which ran like a dog.  Even though it was a lower power machine - a 10 meg mp3 file copied accross my lan in about 2 seconds - enough for me.

 

What I would like is a light weight linux distro that just had samba and swat (web administration of samba) Idealy a web linux admin tool on it as well, so it really performed just like the commercial NAS storage like the snapservers.  I'm sure that linux MUST be the best way of doing this - but I'm completely out of my depth with it.   And I just want the samba stuff - without all the other linux stuff to confuse myself with. 

 

Can anyone point me in a direction of a linux distro that just does NAS?

 

Ta!

 

Matthew

 



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.