X10 Heating & Security Automation - Another Newbie Question!

["a.livingstone" <alivingstone@xxxxxxx>]

Hi Everyone,

First off apologies for the length of this post but I tried to
include as much info as possibe - try and bear with me...

I have some existing X10 kit as follows :

IR7243 IR -> X10 Controller
CM12U Computer Interface
2 x LW10 Wall Dimmers
2 x LM10 Lamp Modules
6 x AM10 Appliance Modules (one controlling motorised curtains)
A Marantz RC5000i to control all this stuff and my home theatre kit,
etc.
Some macros are programmed in the IR7243 via ActiveHome.
And I've just started playing with HomeSeer this week - nice...

I'd like a simple and affordable modular solution to controlling my
home heating and then add home security into one integrated,
automated package.

Priority 1 - Home Heating control:
I have a standard oil fired boiler controlled by a digital timer in a
cupboard.  Initially I would like to 'bypass' this timer (leave it on =
24/7?) and control the boiler with timers trigering X10 commands and
be able to manually over ride the timers from my handset (manual
on/off, advance, 1 hour boost, etc.).  Later I'd like to add
temperature sensors to force the boiler on / off when the temperature
falls / rises above certain levels inside or out.

Priority 2 - External Security Lighting:
I want to replace the 5 existing external flood lights around the
house with X10 activated ones and set up security zones and staged
alerts, i.e. 2 lights activated within a short time of each other
would sound an internal alert or an external warn away. I'd like to
be able to log this somewhere and monitor activity via the net.  I assume this can be done simply enough with HomeSeer and existing X10
kit.  Later I'll add a couple of cameras which I'll also be able to monitor via the net (I have a cable modem).

Priority 3 - Internal Security System:
I have mentioned 2 above as I want to be able to integrate the
external lights into a home security system which will monitor
internal space and external windows and doors.  I want to be able to <= BR> monitor / control this via the web or mobile phone and it will ring /
email me on certain status alerts.  (Any other suggestions other than =
Home Comfort as the start up prices for that can be a little off
putting!)

Note that I have an existing hard wired alarm system which looks to
be a few years old.  It has been mothballed since I moved in several <= BR> months ago - the alarm company wanted nearly =A3600 up front for
servicing, reprogramming, 12  months monitoring and a 'joining fee' as I was a new customer.  Guess what - they didn't get it! 
I assume the existing cables or maybe even the existing PIR detectors
can be used on a new system?  There are 2 keypads - one upstairs / one down, 1 internal door sensor on the entry / exit route and 8
internal PIR sensors.  The alarm is not armed but still active as it <= BR> activated when I disturbed a PIR sensor while redecorating and I had
to
ring the alram company for a reset code - they tried to charge me
=A335 for that...

I'd like my home automation system to be modular and as cheap as
possible so that I can build it bit by bit as and when I have the
money - new house has sapped all the money and life out of me!
It also needs to be a simple enough solution to implement - I've
replaced a heating timer before and I'm great with computers but I'm
no electrician and know very little about electricity other than it
hurts.  Also running new cables may be a problem as the entire ground =
floor is solid concrete floors and walls.

So - who's doing or has done something similar?
Any thoughts / ideas / advice?


Cheers,   :o)

Anthony.

Yahoo! Groups Spons= or

ADVERTISEMENT

For more information: http://www=
.automatedhome.co.uk 
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.