The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE: gf3->Biostar mther->KT133 hassle OT


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: RE: gf3->Biostar mther->KT133 hassle OT
  • From: "Amar Nagi" <amar@xxxxxxx>
  • Date: Wed, 8 May 2002 17:54:55 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks very much I will try that

 

-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 08 May 2002 13:33
To: ukha_d@xxxxxxx Subject: [ukha_d] RE: gf3->Biostar mther->KT133 hassle OT

 

Amar,

Some questions..

1) Whats the chipset on the Biostar motherboard? 

Some things to try:

1) Try changing the AGP Aperture in the BIOS down to 32Mb. this effectively
disables AGP, and will make performance suck. it will, however, tell you
whether it's an AGP problem.

if this makes it work, set the AGP Aperture to half your memory size, then
set these:

AGP 4x - disabled (force to AGP 2x)
AGP Fast-Writes - Disabled
AGP Master 1 WS Write - Enabled
AGP Master 1 WS Read to Enabled
Assign IRQ to VGA - Enabled.
Video BIOS Shadow - Disabled.
Video BIOS Cacheable - Disabled.
Video RAM Cacheable - Disabled.
C8000 - xxxxx Shadow - Disabled.
Peer Concurrency - Enabled.
Concurrent PCI Host - Enabled.
PCI Streaming - Enabled.
VGA Palette Snoop - Disabled.
Memory hole between 15-16MB - Enabled.

Your BIOS may not have all of these options.

Also, you may want to try using the 23.11 Detonators. I don't think Abit
have made too many changes from reference design, so the detonators should
provide a nice stable baseline install.

good luck!

Ian.

-----Original Message-----
From: Amar Nagi [mailto:amar@xxxxxxx]
Sent: 08 May 2002 12:49
To: ukha_d@xxxxxxx
Subject: gf3->Biostar mther->KT133 hassle OT


what runaround i have been having
I have a abit siluro gf3 card and a biostar M7VKB motherboard and
amd 1ghz thunderbird cpu.
I Cannot get it work. Everytime time it hits a 3d game  it freezes or
errors.
I have tried everything possible from updating bios, latest drivers complete
rebuilds.
Nothing works. i have rung their customer support for abit and biostar both
say it is the others fault.
I even rang their california head offices for help and i get NOTHING.
the abit worked fine on a intel board i had.
any ideas anyone - alot of late nights i have had trying to fix this.
I am about to through this motherboard out of the window.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.