The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Cabling Question



BZZZZT !!!!

WRONG !!!! Sorry Simon.

Running cables in PARALLEL is EXACTLY when induction occurs. All cabling
guides tell you to avoid running cables in parallel when they are carrying
signals that are likely to either suffer or cause interference eg.
Low level audio and data circuits SUFFER inteference
High Current mains cables can CAUSE interference.

Where cable cannot be physically separated you should CROSS at 90 degrees to
minimise any induction.

In reality most mains cables dont cause too much of a problem as they have
both Live and Neutral in the same sheath carrying equal currents. These
generate equal but opposite interference fields which cancel each other out
once you get a inch or so away.

To comply with IEE wiring regulations you SHOULD have a physical barrier eg
Trunking between Low and High voltage circuits but that is for SAFETY not
interference rejection. Good wiring practice should aim to make the physical
separation as great as possible to minimise any possible interference.

Keith

www.diyha.co.uk
www.kat5.tv


-----Original Message-----
From: Simon Coates [mailto:ecolume@xxxxxxx]
Sent: 04 May 2002 11:20
To: ukha_d@xxxxxxx Subject: Re: [ukha_d] Cabling Question


Cables running parallel to each other shouldn't induce voltage - induction
happens when wires cross.  Shouldn't be a problem for basic switching but
induced noise can cause problems with IR circuits.  Try and keep any mains
and LV cables at least 50mm apart.

Simon

----- Original Message -----
From: Tony T <home@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: 04 May 2002 10:28
Subject: [ukha_d] Cabling Question


> Hi All,
>
> please excuse my ignorance on cabling, but I was wondering if anyone could
> tell me if running a 5v DC cable alongside a 240v AC cable (lights) could
> cause any undesirable voltage induction(?) into the DC line. Both are to
be
> used for switches, with a possible 3rd cable being run alongside for IR.
>
> P.S. have a great time at the meet all those who are going, wish I could
be
> there...
>
> Many thanks
> Tony T
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.