|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: Silly Question |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Using HomeVision with Dallas Temperature sensors
- To: <ukha_d@xxxxxxx>
- Subject: RE: Using HomeVision with Dallas Temperature
sensors
- From: "Ian B" <Ian@xxxxxxx>
- Date: Fri, 3 May 2002 20:39:19 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
There is some jiggery pokery with a resistor that was mentioned on the
HV
list. If you run into any problems I suggest you ask there.
The temp is also read in farenheight not Celsius. It can do the latter but
I
found calc problems with it which I have not solved yet.
Ian B
> -----Original Message-----
> From: Kenneth Watt [mailto:kennwatt@xxxxxxx]
> Sent: 03 May 2002 19:33
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Using HomeVision with Dallas Temperature
sensors
>
>
> Mark,
>
> Have you got the expansion board as you need that?
>
> Other than that it's fairly straight forward to use the Dallas
stats
> with HV, or are you trying something a bit different? If I can be
any
> help I will but I didn't find much more info than is in the HV
bible.
>
> K.
>
> > -----Original Message-----
> > From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
> > Sent: 03 May 2002 18:12
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Using HomeVision with Dallas Temperature
sensors
> >
> > Are the Dallas Temperature sensors listed on the Homevision
page
> (DS1820)
> > the same as Dallas 1-wire stuff?
> >
> > If so, is there a good page about actually using them with
Homevision?
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe: ukha_d-subscribe@xxxxxxx
> > Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> > List owner: ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
Yahoo! Groups
Sponsor |
ADVERTISEMENT
|
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|