RE: Amplifying rear speakers separatly

["BUTLER, Tony, FM" <tony.butler@xxxxxxx>]

Nikola,

 

You could try a Parasound Zamp - they are about the size of your average Wrox Press book :)

 

Tony

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 27 March 2002 11:51
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly

Thanks Mark,

Can you please help me with this, just to finish the thread:

I want to play music (radio/CD/MP3 whatever) from my amplifier in bedroom. I have no speaker cables installed, and it'will not be easily possible to install them, the only cable I have is CAT6 network. I already found that it's not possible to use CAT6 as speaker cables (it is, but results will be crap), so my only option is to use KAT5 and transfer line level signal over CAT6 into bedroom. However, I don't have space in bedroom to put separate "normal" amp, so I plan to find small, compact amplifier and hide it somewhere, and install NXT Wharfdale Loudpanels and put them on the wall. Subwoofer that comes with them, and small amp, I plan to hide under the bed.

Because, amplifier will be hidden, and volume control (if it has it) inaccessible, I would like to control the volume from the main (Sony) amp in the living room. Of course, I have to sort out IR distribution for that, if I don't want to walk to living room.

Do you know where I can find such small amp, which can drive Loudpanels? Just checked on Richer Sounds, and they don't have them on web site anymore, but I'll find them somewhere. What power rating I should look for? Loudpanels are rated as 30W per speaker + 25W subwoofer.

It seems that you're an expert on this topic (according to the gear you have installed :-)).

Cheers,

Nik

-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 27 March 2002 11:01
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly

Nik,

Everything else you said is perfectly correct.

Regards,

Mark Harrison
Head of Systems, eKingfisher

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 27 March 2002 10:31
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly


But, is the rest that I said O.K. or I'm talking b...cks.
Nik

-----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 26 March 2002 17:41
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly


Nikola,

If you have a volume control, you have variable gain.

If you don't have a volume control, you have fixed gain.


Mark Harrison
Head of Systems, eKingfisher

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 26 March 2002 17:04
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly


I think that trick is then in amplifiers:
You have 3 amplifiers: 2 for front and 1 for rear speakers.
Integrated amp on front drives treble speakers
Power amp drives basses on front
Pioneer drives rear speakers

I asume that we can simplify this to having two amps, one for front, one
for rear speakers. But it seems that the trick is in amplifiers:

A power amp has FIXED GAIN, rather than a variable gain, so you need
something else to control the volume, otherwise it would always be at
max.

What does this mean? How can I know if amplifier has fixed or variable
gain?
E.g. I have Sony STR DB 1070 amp, which has 5.1 channel outs and 5.1
pre-amp outs. I asume that pre-amp ones are interesting ones. Then I
should connect pre-amp outs for rear speakers into line in of some small
stereo amplifier.
I plan to find some small, compact, stereo amplifier with volume control
only, which can be easily hidden, and connect Sony pre-amp out ->KAT5->
small amp Line in.
Is that O.K.
Then, I plan to adjust the level of rear amp with sound level meter at
some reference level and from then on, not to touch it anymore.
When I raise or lower the volume on the main amp (Sony), the volume
should change on all speakers.
Is my theory O.K.?
Nik

  -----Original Message-----
From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
Sent: 26 March 2002 15:51
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly



Git!

OK, here goes, how I do DVD playback:

ALL SIGNALS FROM HERE GO AS DIGITAL STREAMS, EITHER PCM OR DOLBY DIGITAL
DEPENDING ON THE SOURCE MATERIAL

- The source is a Pioneer DVD player (second black box from the bottom
on the right-hand stack)

The audio goes, via SP/DIF (the single reddy-pink cable), down onto the
floor, then into the source switch

- The source switch is a Meridian 562V, (middle black box, narrower
width, on the left-hand stack)
--- It's worth noting that the other sources, such as the DDAR (top
black box, narrowest width, on the left-hand stack) that go into the
562V as analogue get CONVERTED into DIGITAL at this point... All the DSP
stuff happens entirely in the digital domain.

Assuming that the selected source is "DVD", this goes, via (a virtually
impossible to see) SP/DIF cable into the processor

- The processor is a Meridian 561 (lower black box, narrower width, on
the left-hand stack)

WHILE THE PROCESSOR IS CAPABLE OF OUTPUTTING UP TO 8 CHANNELS OF AUDIO,
IN EITHER ANALOGUE OR DIGITAL FORMAT, AT PRESENT I ONLY USE 4 CHANNELS,
AND OUTPUT THEM ALL AS ANALOGUE AT LINE LEVEL

Front pair

The main stereo pair come out on a (virtually impossible to see) pair of
phono connectors into the integrated amp

- The integrated amp is a John Shearne Phase 2 (wider width, but thinner
depth top black box on the right-hand stack.)
--- the black speaker cables go out of this and drive the treble drivers
on the front speaker pair

The integrated amp also has a line-level passthrough on the
(purpley-pink) analogue pair to the power amp

- The power amp is a John Shearne Phase 2 (wider width, but thinner
depth second-to-top black box on the right-hand stack.)
--- The pinky speaker cables go out of this and drive the bass drivers
on the front speaker pair

Rear pair

The rear stereo pair come out on a (virtually impossible to see, but you
can see the red and white boots on the processor) anlogue pair, into a
KAT5 TX

- The KAT5 TX is almost out of shot, on the floor, but you can just see
a corner of it at the far right on the bottom edge of the picture, to
the right of the mains block

... this goes into a CAT5 socket in the wall, back to the patch panel,
where it's patched to a CAT5 socket at the other end of the room. This
goes into a KAT5 RX, which drives an old Integrated amplifier (Pioneer
A-400), which drives a the rear pair of speakers.

Volume controls

The logic in this is that the "changing the volume" circuitry (pre-amp)
is kept separate from the "amplifying lots" circuitry (power amp) to
avoid interference.

A power amp has FIXED GAIN, rather than a variable gain, so you need
something else to control the volume, otherwise it would always be at
max.

The pre-amp, which is the only volume control that ever gets touched, is
on the processor. The processor, as we've seen purely operates on a
DIGITAL input, and turns it into line-level, ANALOGUE outputs.

In practice, both the front and rear amplifiers actually have volume
controls, but these are just left "whacked up to about 75%", and the
volume adjustment is done on the processor.

Mark Harrison
Head of Systems, eKingfisher

-----Original Message-----
From: James Hoye [mailto:james.hoye@xxxxxxx]
Sent: 26 March 2002 15:07
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Amplifying rear speakers separatly



Ahh I see a man about to be initiated into the "real" audio club :-)

Go mark go mark go mark :-)

And feel free to refer to
http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg
<http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg>
< http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg
<http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg> >
< http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg
<http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg>
< http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg
<http://groups.yahoo.com/group/ukha_d/files/mharrison_avkit.jpg> > >  as
you
explain!!!

James H


Yahoo! Groups Sponsor     

ADVERTISEMENT

<
http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
<http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
>
<
http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
<http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
>
>
041992:HM/A=989464/R=0/*
http://ad.doubleclick.net/clk;3960804;6985034;q%
<http://ad.doubleclick.net/clk;3960804;6985034;q%>
< http://ad.doubleclick.net/clk;3960804;6985034;q%
<http://ad.doubleclick.net/clk;3960804;6985034;q%> >
3F http://www.babycenter.com/?adcode=DAR:ADV:YHO
<http://www.babycenter.com/?adcode=DAR:ADV:YHO>
< http://www.babycenter.com/?adcode=DAR:ADV:YHO
<http://www.babycenter.com/?adcode=DAR:ADV:YHO> > > Click Here!     

<
http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
<http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
>
<
http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
<http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
>
>
pmail/S=1705041992:HM/A=989464/rand=514574564>      

For more information: http://www.automatedhome.co.uk
<http://www.automatedhome.co.uk>
< http://www.automatedhome.co.uk <http://www.automatedhome.co.uk> >
< http://www.automatedhome.co.uk <http://www.automatedhome.co.uk>  <
http://www.automatedhome.co.uk <http://www.automatedhome.co.uk> > > 
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
>
> Service.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
<http://www.messagelabs.com>
< http://www.messagelabs.com <http://www.messagelabs.com> >
________________________________________________________________________




Yahoo! Groups Sponsor     

ADVERTISEMENT

<
http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
<http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
>
041992:HM/A=989464/R=0/*
http://ad.doubleclick.net/clk;3960804;6985034;q%
<http://ad.doubleclick.net/clk;3960804;6985034;q%>
3F http://www.babycenter.com/?adcode=DAR:ADV:YHO
<http://www.babycenter.com/?adcode=DAR:ADV:YHO> > Click Here!     

<
http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
<http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
>
pmail/S=1705041992:HM/A=989464/rand=803546026>      

For more information: http://www.automatedhome.co.uk
<http://www.automatedhome.co.uk>
< http://www.automatedhome.co.uk <http://www.automatedhome.co.uk> > 
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
> Service.




Yahoo! Groups Sponsor     

ADVERTISEMENT

<http://rd.yahoo.com/M=219366.1963810.3448283.1501134/D=egroupweb/S=1705
041992:HM/A=989464/R=0/*http://ad.doubleclick.net/clk;3960804;6985034;q%
3Fhttp://www.babycenter.com/?adcode=DAR:ADV:YHO> Click Here!     

<http://us.adserver.yahoo.com/l?M=219366.1963810.3448283.1501134/D=egrou
pmail/S=1705041992:HM/A=989464/rand=531176531>      

For more information: http://www.automatedhome.co.uk
<http://www.automatedhome.co.uk> 
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

------------------------ Yahoo! Groups Sponsor ---------------------~-->
FIND OLD SCHOOL FRIENDS and OLD FLAMES
Click here to start your search at Reunion.com today!
http://us.click.yahoo.com/NFsLKA/Dn2DAA/ySSFAA/IBOolB/TM
---------------------------------------------------------------------~->

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxxSubscribe: ukha_d-subscribe@xxxxxxxUnsubscribe: ukha_d-unsubscribe@xxxxxxxList owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



********************************************************************
Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************


Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.