Re: re. IPCop HELP - another similar problem

["nick_towers2000" <nickt@xxxxxxx>]

Steve,
You might well be right but its all rather alien to me. Any pointers
to where I could learn about this?
Nick

--- In ukha_d@y..., "Steve" <steve@b...> wrote:
> Could you write a small bash script which is run on start up to run
the
> commands you need to type in to bring the cards up manually.
>
> Will be downloading ipcop tonight as i have come accros a space box
to have
> a dedicated linux box again...
>
> So I might be able to help you, if you can do bash scripting, send
me the
> commands, and I will write a bash script, and tell you how to run
it on
> startup.
>
> HTH Steve
> ----- Original Message -----
> From: "nick_towers2000" <nickt@t...>
> To: <ukha_d@y...>
> Sent: Monday, March 18, 2002 10:41 AM
> Subject: [ukha_d] re. IPCop HELP - another similar problem
>
>
> > I've similar problems with network cards & IPCOP - thought
I'd
try &
> > use and old P75 with some old, spare nic's - an old Kingston
KNE2000
> > ISA non-PnP card and a EZ2000 non PnP BNC only card (both ne2k
> > compatible). I can get the EZ2000 recognised on irq10 io 0x300
using
> > manual NIC setup & the ne driver (command ne io=0x300
irq=10), but
> > the KNE2000 will not get recognised even though I've configured
it on
> > DOS (using the DOS Qstart utility supplied with the card on
floppy),
> > and using a multiple NIC command (ne io=0x300, 0x240, irq=10,5).
> > It might be possible Paul for you to choose manual on the NIC
setup
> > part of the install & try a command like the above, you'll
need to
> > know the io/irq for your NIC and whether its NE2000 compatible,
or
> > compatible with the other supported cards (then substitute ne
with
> > <<Linux driver name>>).
> > I've another quirk with my setting up - if I try to set up the
EZ2000
> > as a green (Red is modem/isdn) setup, I can only do this by
trying to
> > set up as Green/Orange (red=modem etc), ipcop then complains
about
> > not being enough cards, I revert to Green with red as modem etc
then
> > it installs ok & I can see it from my network, run the http
admin
> > etc. Unfortunately if I reboot it will not bring the network up
> > recognising the card etc, I have to do this "frig"
again. Anyone
any
> > ideas how to sort these issues?
> >
> > Nick
> >
> > --- In ukha_d@y..., "paul_watkin"
<paul_watkin@y...> wrote:
> > > Pedro, (or anyone else with IPCop)
> > >
> > > I tried to install IPCOP last night on an old HP 486 with
embeded
> > NIC
> > > (AMD PCnet) and a Netgear FA310TX. Neither card was found
during
> > the
> > > install.
> > >
> > > Any ideas what I can do to try and get this running??
> > >
> > > Has anyone got a 3Com 509B card working on an IPCOP machine?
(have
> > > one these on it's way from ebay)
> > >
> > > Regards
> > >
> > > Paul
> > > > -----Original Message-----
> > > > From: paul_watkin [mailto:paul_watkin@xxxxxxx...]
> > > > Sent: 14 March 2002 12:01
> > > > To: ukha_d@y...
> > > > Subject: [ukha_d] Firewall : WAS Re: was BabyCam now
hacking
> > > >
> > > > Thanks Pedro,
> > > >
> > > > My knowledge of Networking (at a software level) and
Linux is
> > > minimal
> > > > to say the least, Is it easy for a beginner to setup?
> > > >
> > > > I have no linux experience and it was easy to setup. 
It
> > basically
> > > asks you
> > > > question to which you answer and based on this it sets
up your
> > > firewall.
> > > >
> > > > Why would I use the DHCP, NAT server functions, are
these
> > superior
> > > to
> > > > those embeded in the Router?
> > > >
> > > > Probably not superior as they are doing the same thing
> > > >
> > > > Anybody suggest a good book I should read before
playing with
> > this
> > > > lot?
> > > >
> > > > Can't help on this one
> > > >
> > > > Regards
> > > >
> > > > Paul
> > > >
> > > > Pedro
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@y...
> > Subscribe:  ukha_d-subscribe@y...
> > Unsubscribe:  ukha_d-unsubscribe@y...
> > List owner:  ukha_d-owner@y...
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >