The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RGB to SVideo vs KAT5


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: RGB to SVideo vs KAT5
  • From: "Ben McCormack" <ben.mccormack@xxxxxxx>
  • Date: Mon, 18 Mar 2002 11:29:14 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi

I have found that there is no difference between Sky Digital Composite
and RGB.

I have got a Loewe Ergo 28" and Panasonic Sky digital box and I was
using good quality SCART leads.

I spoke to a HiFi dealer friend of mine who tested the same theory and
he agreed that there was no difference, he suggested that is was to do
with the quality of converters on the Sky box.

Not sure what to make of it all

Regards

ben

-----Original Message-----
From: BUTLER, Tony, FM [mailto:tony.butler@xxxxxxx]
Sent: 18 March 2002 11:26
To: 'ukha_d@xxxxxxx'
Subject: [ukha_d] RGB to SVideo vs KAT5


Following recent mentions of the RGB to S-Video converters @
www.rgbtosvideo.com, I purchased one of these and connected it up as
follows:

Panasonic SKY Digital box -> RGB2SVideo -> AV Amp -> TV
and also I had
Panasonic SKY Digital box -> KAT5 -> TV

Now the KAT5 unit is picking up the composite signal from the sky box,
so in theory, the RGB2SVideo picture should be better.

Disappointingly, they were as near as damn it identical.

This means one of the following:

1. The RGBToSVideo unit is worse than expected (though ppl on the group
were happy with it) and is degrading the signal to composite levels 2.
The KAT5 unit is so good that it is resolving the composite signal to
SVideo levels! 3. I've got a _special_ edition panny that outputs SVideo
>from
AV amp to the TV is about 8-10m long (screened RGB cable adapted to feed
svideo & composite signals) so maybe the loss in the cable is so great
that it reduces the SVideo out of the amp to Composite quality......

I guess what I really need to do is go
Panasonic SKY Digital box -> AV Amp -> TV  (composite)
and
Panasonic SKY Digital box -> RGB2SVideo -> KAT5 Amp -> TV (SVideo)
to see if the cable is the problem.
I didn't do this initially because
1. I didn't want to daisy chain the two devices in case of some sort of
signal problems (as I had with the panny/kat5 initially) 2. I haven't
got an svideo -> SCART lead (lots of Scart -> Svideo though :(
)

thoughts anyone?


cheers,


Tony


********************************************************************
Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information, if
you are not the named addressee, you are not authorised to retain, read,
copy or disseminate this message or any part of it.
********************************************************************


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.