|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: Review: BMW i3, My First Drive in an Electric Car |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: Modem Problems, please help
Patrick,
Thanks for the info,
I'm not using a pbx, so its a straight connection to my modem.
The
capacitor issue had occurred to me as I am in Ireland, and the only
difference between us and the uk is that we effectivly use slave sockets
on
all phone points, and the ringing capacitor is normally in the phone. If
you
buy a UK phone for use over here, you need an adapter which converts
the
socket type, and also has a ringing capacitor in it. I recently did a
fair
bit opf rewiring and coudl not remember wether or not I had previously
used
on of these adaptors on my modem connection, so I put it in line to see
if
that was the problem, but got the same result.
The only other issue which dawned on me is something
with my pc
settings. I have trhee PCI cards. Two of them are modems, and the other
is
an additional two serial com ports. If I go to my modem settings it
shows
that I have 11 com ports ?
Eamon
----- Original Message -----
From: "PatrickLidstone" <patrickl@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, June 10, 2002 10:37 PM
Subject: [ukha_d] Re: Modem Problems, please help
> --- In ukha_d@y..., "Eamon O Gorman"
<eamonogorman@e...> wrote:
> > All functions work fine on the modem, with the expectoin of
the
> dial in. The modem does not see incomming ringin when I dial in,
so
> does not answer. I have a second modem on the pc, which works fine
> when I plug the phone line into it, and it recognises the
incommming
> ringing. So far I have :-
>
> It's not completely clear from your description whether you have a
> PABX in the chain? If you do, I would suspect the wiring of the
> extension socket. The extension socket to the modem should be a
> master socket, with a ringing capacitor, not a slave socket, and
it's
> possible that the original socket has gone defective. The fact
that
> one modem answers and the other does not when using the same
socket
> does not necessarily indicate that the socket is ok, since there
are
> two ways of detecting ringing from an electrical point of view with
a
> UK socket.
>
> Patrick
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|