----- Original Message -----
Sent: Tuesday, June 04, 2002 8:27
PM
Subject: Re: [ukha_d] Can Bus
Hi Frank,
I'll try and put something up this
week.
The MCP2510 is only 2.91 and the 82C251
transceiver is 1.25 in one off quantities from Arrow Electronics. You need
both to make a can bus interface. This is a non-isolated type but I do have
an
isolated version but this bumps the price right up by about 7 - 8 quid
because
of the DC-DC convertor.
The touch screen I built myself from a
surplus LCD display and a low cost touch screen. Got the LCD for about 80
quid
and the touch screen and controller for 105 quid inc. I have since added an
LVDS receiver to the box to allow me to locate the LCD away from the CPU
card
by upto 12 metres. This cost of 43 quid inc.
If you are interested in the LCD's I know
where
you can get some for hopefully the same price as I paid.
Regards
Dave...
----- Original Message -----
Sent: Tuesday, June 04, 2002 11:11
AM
Subject: Re: [ukha_d] Can Bus
Hi Dave
Let us know when you put the Can Bus stuff on site.
Rummaged thru stuff i downloaded and found some app notes from microchip on
Can Bus so started reading again . Are the chips expensive? Also is that
your own touch screen on your site, expensive? .I installed one today on a
machine (siemens) $10,000 .
Frank Mc
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.