The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: Hmevision ir transmitter



Hi Andy and Ian
                         Over the weekend i will make a prototpye of the
circuit i have and test  it. As  Ian B suggested, in my circuit only one tx
is active at any time. If you require that several Zones are active at
exactly the same time then go down the path Ian suggests. Also the circuit
you are working on make sure the LEDS are the correct way round.

Frank Mc
----- Original Message -----
From: "Ian Davidson" <ian@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, May 31, 2002 3:54 PM
Subject: Re: [ukha_d] Re: Hmevision ir transmitter


> Andy
>
> Ok lets get something working!
>
> Firstly lets check the led's will light. Short out the collector and
emitter
> of the 2N2222. This is quite safe, and is the equivelent of just wiring
the
> led's and resistor to a battery. The LED's should light. If they do not
I'm
> afraid you have a wiring error somewhere.
>
> Now if that is ok, we now need to check that TR2 switches. So remove the
> short from collector / emitter. Also remove the link between from the
> emitter of tr1 to the base of tr2. Now connect say a 1K Ohm resistor from
> the base of tr2 to the +5v supply. Again the LED's should light, if not
this
> would sugest a problem with tr2.
>
> Now if you get this far remove the 1K and replace the link between emitter
> and base. Now try putting the 1K Ohm between the base of TR1 and the +5V
> supply again the LED's should light.
>
> Ok let me know how far you get. If I get chance I'll try to read the group
> via Yahoo at work but if not I'll get back to my mail around 6pm.
>
> Ian D
>
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.