|
James,
I found that case. I was looking for an empty case like the
Maplins
ones.
I'm not wanting the 1U for a server, so height isn't a problem -
I
need them to house some automation equipment and SMPSs (only 38mm high)
etc...
I suppose I might end up making them myself.
BTW I'm currently designing a 3U housing for HomeVision with LED
indication
of 64 inputs and 24 outputs with a 5.6" TFT monitor. It's looking
good on
paper! :o)
Thanks
Simon
----- Original Message -----
Sent: 28 May 2002 22:03
Subject: Re: [ukha_d] Rackmount
cases
Does anyone know of a supplier of 19" rackmount cases. I'm
wanting
something similar to the Maplins cases (ie. style and cost) but I need
them to be deeper. I'm looking for 1U and 2U sizes approx 500mm
deep. I've been surfing but I'm struggling to find a supplier
:o(
As Chris points out, Novatech do
a
1U one complete with 200W ATX PSU. It's not cheap at £99 +VAT, but
delivery is free (for mainland at least). I've just got one - and
it's
deep - too deep - necessitating me taking a jigsaw to node zero to
accommodate
it :O
OK, so this is a bit more
expensive
than a £35 Craplins one - but you try and find a 1U PSU..... They're
not
cheap. Q suggested taking a Dremel to a normal one - but I've just
had a
nose at a 230W one and the heatsink's too high. There may be other
normal ones that are slightly shorter - but until you open one up you don't
really know.
Usual disclaimer applies - if in
doubt, don't open PSUs up and mess with them!
James
H
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|