FW: Homeseer's WAY2CALL Phone system

["Keyvan Rahimian" <keyvan@xxxxxxx>]

Sorry sent this offline ooops 

I am using a pig-tail converter (RJ-11 to BT style socket).

I am not sure about the pinouts but looking at the RJ11 end (with conductors facing down) it is red blue green white.

The red is running to the 1st conductor on the BT plug (next to the plug retainer thingy!!)

It might be worth noting, I was using a different converter earlier (a BT moulded one) and while homeseer / HSphone worked fine on the internal system (# cmd) it would not dial out. But all is fine now that I have changed converter.

Hope this helps. I am not really that familiar with phone wiring but will try to explain the pinout as best I can.

KR

-----Original Message-----
From: Christian Cundall [mailto:ukha@xxxxxxx]
Sent: 20 July 2002 20:28
To: keyvan@xxxxxxxSubject: RE: [ukha_d] Homeseer's WAY2CALL Phone system

Keyvan

 

What sort of cable are you using between the HiPhone and DECT system? Any chance of pinouts?

 

Cheers.

-----Original Message-----
From: Keyvan Rahimian [mailto:keyvan@xxxxxxx]
Sent: 20 July 2002 19:40
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Homeseer's WAY2CALL Phone system

I just received mine (Hi-Phone) today from HomeSeer - It worked fine out of the box.

Had to U/G to Homeseer 1.6 beta. But it all seems to work fine.

I can give Homeseer voice commands on the dect handsets, get it dial out names from the address book, the message management seems to work fine too. Is only been a couple of hours since I installed it so no chance to test everything.

I never really trained my HS voice recognition system so some of the voice commands and dial instructions just have no effect!!

But it all seems to work fine on the H/W side.

 

KR

-----Original Message-----
From: Christian Cundall [mailto:ukha@xxxxxxx]
Sent: 19 July 2002 19:01
To: ukha_d@xxxxxxxSubject: [ukha_d] Homeseer's WAY2CALL Phone system

Well I promised you an update of the Way2Call HIPhone Desktop USB phone that I brought from Homeseer. It arrived at the beginning of the week and I have spent all week trying to get it working.

 

Well the thing is very cheaply constructed i.e. all the sockets on the back don't line up!, but aside from that the software drivers

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.