|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: Scottish Meeting |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: BT cabling through patch panel
- To: ukha_d@xxxxxxx
- Subject: Re: BT cabling through patch panel
- From: "psghome2002" <psghome@xxxxxxx>
- Date: Sat, 13 Jul 2002 17:11:07 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
How about patching it out to multiple CAT5 points? i.e. spliting the
incoming line and patching to, say, 4 locations. Would you connect
several patch panel connectors together in parallel (wiring behind
the panel) and then use these 'sources' to patch out to the required
points - a bit like a hard-wired telephone hub in concept.
Paul.
--- In ukha_d@y..., "Nikola Kasic" <nikola@k...> wrote:
> You just plug jour phone line in patching panel and then plug
phone in
> network socket. So you'll use Cat5 for phone line and any network
point can
> be used as phone point. That's how I use it (and most of the
people)
> Of course, you'll need adaptors for converting BT plug into RJ45
and vice
> versa.
> You can find some at www.videk.co.uk. Try product code: 42824283
and you'll
> see the picture.
> It's under UTP/STP system components/voice network accessories.
> Cheers,
> Nik
>
> -----Original Message-----
> From: psghome2002 [mailto:psghome@h...]
> Sent: 13 July 2002 10:06
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] BT cabling through patch panel
>
>
> I know there has been a lot of posts in the past about BT
telephone
> wiring over CAT5. I've had a search but couldn't find the
right
> info...
>
> I've now got most of the structured CAT5 cabling in place
and am
> starting the (really tedious) job of terminating it to the
patch
> panels (3 x 48 way). What's the best way of wiring the
phone
lines
> so that I can use the patch panel to route a line to any
of the
> outlets? Do you simply daisy-chain the incoming line to
several
> patch panel ways and then patch to the relevant outlet?
Also, is
> there a standard for colour coding i.e. which wires/pins
on the
CAT5
> correspond to the BT numbering system.
>
> Thanks,
>
> Paul.
>
>
> Yahoo! Groups
Sponsor
>
> Click here to find
your contact lenses!
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms
of
Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|