RE: RCS TX15-B Thermostat

["Kevin Hawkins" <lists@xxxxxxx>]

      Hi Peter -  What version of the script
did they send you ? - I am
using Rev 20010106 (listed at the top of the file) - if yours is any
later
could you kindly send it to me.
      The log file is a great place to look to see
what is happening - if
you need any help here as to what it should look like then let me know
but
you should see an initialisation by Homeseer & periodic data from the
TX15-B
- I have attached a small section of my file. This 'saved' file looks a
little different to what you see on screen however. In my first setup I
was
receiving bad data but I could still see the received data - it was
just
missing housecodes etc and the thermostat status column in devices had
corrupt info in it. (plus the device command control box for the TX15-B
complained).
      BTW are you using a recent Beta of Homeseer
or the rather old
'release' version (1.5.10 ??) - there were some problems with the
thermostat
that appeared in Beta v 1.5.57 but were fixed again in 1.5.58. Latest is
now
1.5.59 The update now is done online in Homeseer from the Help >
Upgrade
menu. Because the released version has not been updated for yonks
almost
everyone I think is now using the Betas which I have found to be very
stable
although they change every few days.

      Kevin

02/07/02 12:12:00~!~Info~!~Script engine version: 5.6.7426
02/07/02 12:12:12~!~Send X10 from ext interface~!~H4 preset dim dim: 
26
extra:  0
02/07/02 12:12:12~!~Send X10 from ext interface~!~H5 preset dim dim: 
0
extra:  0
02/07/02 12:12:16~!~X10 Received~!~H14 (?)  H Preset Dim2 29
02/07/02 12:12:16~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:17~!~TX15B Info~!~Temperature = 65
02/07/02 12:12:17~!~Send X10 from ext interface~!~H5 preset dim dim: 
1
extra:  0
02/07/02 12:12:19~!~X10 Received~!~H15 (?)  H Preset Dim 5
02/07/02 12:12:19~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:20~!~TX15B Info~!~Setpoint = 73
02/07/02 12:12:20~!~Send X10 from ext interface~!~H5 preset dim dim: 
2
extra:  0
02/07/02 12:12:22~!~X10 Received~!~H6 (?)  H Preset Dim 1
02/07/02 12:12:22~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:22~!~TX15B Info~!~Status Report: Heat
02/07/02 12:12:23~!~Send X10 from ext interface~!~H5 preset dim dim: 
3
extra:  0
02/07/02 12:12:25~!~X10 Received~!~H6 (?)  H Preset Dim 4
02/07/02 12:12:25~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:25~!~TX15B Info~!~Status Report: Fan On
02/07/02 12:12:26~!~Send X10 from ext interface~!~H5 preset dim dim: 
5
extra:  0
02/07/02 12:12:28~!~X10 Received~!~H13 (?)  H Preset Dim 4
02/07/02 12:12:28~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:28~!~TX15B Info~!~Setback-delta = 8
02/07/02 12:12:29~!~Send X10 from ext interface~!~H5 preset dim dim: 
4
extra:  0
02/07/02 12:12:31~!~X10 Received~!~H6 (?)  H Preset Dim 7
02/07/02 12:12:31~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:32~!~TX15B Info~!~Status Report: Setback Off
02/07/02 12:12:43~!~X10 Received~!~H5 (?)  H Preset Dim 0
02/07/02 12:12:43~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:44~!~TX15B Info~!~Request Status: Temperature
02/07/02 12:12:44~!~X10 Received~!~H14 (?)  H Preset Dim2 29
02/07/02 12:12:44~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:12:45~!~TX15B Info~!~Temperature Report = 65
02/07/02 12:13:43~!~X10 Received~!~H5 (?)  H Preset Dim 1
02/07/02 12:13:43~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:13:44~!~TX15B Info~!~Request Status: Setpoint
02/07/02 12:13:44~!~X10 Received~!~H15 (?)  H Preset Dim 5
02/07/02 12:13:44~!~Event Trigger~!~X10 Trigger (RCS Receive H) 
02/07/02 12:13:45~!~TX15B Info~!~Temperature Report = 73



>  -----Original Message-----
> From:       Peter Tuckett
[mailto:ptuckett@xxxxxxx] 
> Sent:      02 July 2002 07:21
> To:      ukha_d@xxxxxxx
> Subject:      RE: [ukha_d] RCS TX15-B
Thermostat
> 
> Kevin thanks for the info - I did see your later reply after I sent
mine!
> I have been posted the latest script file by homeseer and the
following
> note which I will investigate:
> 
>  > When HS sends out the X10 commands to poll the thermostat,
do you see
> > any replies in the HS log? You should see the responses. If you
do, HS
> > may not be set up to receive the X10. Try deleting any events
that are
> > in the group “System” (they would be named “RCS Receive”). If you
delete
> > these then restart HS, they will be re-created automatically. I
have
> > also attached the latest RCS script in case you have an old
one.
> 
> 
>            
            Kevin
> 
>

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

<<attachment: winmail.dat>>