|
Hi All
Firstly
congrats to Keith D with his Kat5 Project Progress that should make
quite
a few people happy.
Well ive
just
built the 8 zone ir rx/repeater prototype also i zone reciever and
currently
testing. After some frustrations which is normal for me anyhow ,i am
now
able to send a signal from a zone reciever signal to my
central
reciever , then retransmit to homevision which scans the rx active mux
and
transmits the signal(saved in hv) to the correct zone device. At the
moment
im sending vol up ,vol down and mute to my dvd player. I decided to use
Cat5
setup this time but need to test on long runs,hopefully will be ok.Will
build
more zone recievers on the weekend and test more. Had some problems with my
Lg
Tv as it uses that rc5 format and multiple codes need to be saved for each
button press . Any advice on this most welcomed. Hopefully some more good
news
after the weekend.
Frank Mc
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|