The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Node 0 install



Hi

The camera cable is a 4 core cable and a small 75 Ohm coax all inside a
foil
shielded single cable approx the size of CAT5. It allows a camera to be
powered and a PIR signal etc, as well as the video to be sent down the
single cable. I've run it to were I think I'll mount some CCTV camera's.
I'll use a switcher to switch to which ever i/p is nearest to the active
PIR.

The RG58 has many uses. UHF aerial for 433Mhz license free, UHF/VHF use
(I'm
in the comms industry and it will allow me access to some of our systems if
necessary), Possibly for a 2.4Ghz aerial to link my network to the brother
in laws house about 1/4 mile away and also for some local amateur radio
work
if I ever finish wiring the lot up.

Ian D

----- Original Message -----
From: "Tracey Gardner" <tracey.gardner@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, January 28, 2002 8:41 PM
Subject: Re: [ukha_d] Node 0 install


> Hi Ian
>
> I'd be grateful for some information on the "camera" cable
and
> where/how you intend to use it and what's the RG58 for?
>
> Cheers
>
> Tracey
>





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.