[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re[2]: Fw: Relaunch of Autoglide by Silent Gliss
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re[2]: Fw: Relaunch of Autoglide by Silent
Gliss
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Mon, 28 Jan 2002 00:42:34 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> 3. Combined with an x10 Universal module it supports discrete
> open close, rather than just toggle - If you go for the more
> advanced X10 module it is possible to program in stop points
> for use in screen masking applications.
The Swish (and I assume the Silent Gliss) motors support discrete open
and discrete close as well as toggle lines ... In fact the original (and
cheaper) K400 motors are better to automate than the K600 ones!
How do you get the stop points programmed accurately for screen masking
applications Tim? I reckon you need to be accurate to about 1/4 of an
inch at worst and for that kind of accuracy timing is usually no use.
Phil
Home |
Main Index |
Thread Index
|