[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Dim to 0%
On Thursday 17 January 2002 11:00 am, James, Daniel wrote:
> If you have sent the command "Off" to the LM, next time you
turn it on, to
> for example a 30% preset dim, X10 sends the module the command
"On" first
> and then Dim to X% - so the light comes on bright and then dims down.
I'm not being picky, but it's the LM module that causes the problems, not
X10
itself. When you tell it to come on at 30% it's the LM module that decides
to
come on at 100% then dim down. X10 does not send two commands.
Just clearing up any confusion.
--
Stuart Grimshaw <stuart@xxxxxxx>
Chief Operations Officer
Football Networks Ltd
-
t:07976 625221
f:0870 7060260
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|