|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: NOT SO Very cheap Cat5e cable
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Soldering iron for IRDA chips
- To: "Ukha_d" <ukha_d@xxxxxxx>
- Subject: Soldering iron for IRDA chips
- From: "Ian B" <Ian@xxxxxxx>
- Date: Tue, 15 Jan 2002 08:46:32 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Does anyone out there have a recommendation for a specific soldering iron
for these SSOP maxim chips recently discussed. I have looked on RS but
nothing starts until about 300 quid which is way too much. Maplin have a
temp controlled soldering station (BP53H) which is a little better priced
but there is not enough detail to tell me if it will do the job.
Ideally someone will say iron X from Y or Z at about 50 quid will do you
just nicely. Can anyone suggest such a beast.
Thanks
Ian
Home |
Main Index |
Thread Index
|
|