[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Connecting a PIR to HomeVision
- To: <ukha_d@xxxxxxx>
- Subject: RE: Connecting a PIR to HomeVision
- From: "Graham Kiff" <graham.kiff@xxxxxxx>
- Date: Sat, 12 Jan 2002 17:07:54 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Doh!! No wonder I got stuck, just looked at Port B in the HV
manual
- it all becomes clear!
Thanks
for your help Kenneth
Graham,
Not
Port
A, Ports B or C as they are inputs, Port A is an output port!
On a
PIR
the connections should be:
+ to 12V DC positive not fed from HV
-
to
12V DC negative " " "
"
+
Relay to one of the ports on HV B or C
- Relay to the corresponding GND
to
above on HV
The tamper connections I take it you're not bothered about
if
it's for
bringing on lights.
HTH
K.
>
-----Original
Message-----
> From: Graham Kiff [mailto:graham.kiff@xxxxxxx]
>
Sent: 12 January 2002 16:24
> To: UK HomeAutomation
ListServer
>
Subject: [ukha_d] Connecting a PIR to HomeVision
>
> I
electronics knowledge is worse than useless, so I need some help
>
connecting a PIR to Port-A on HomeVision.
>
> I have the
following:
> 1 x CLIP-1 PIR bought
from
LetsAutomate
> 1 x 12v DC Power
supply
>
> The PIR has 6 connectors, 2 power, 2 NC tamper and
2
NC movement
> detection.
>
> I realise that -ve &
+ve
>from
(terminals 3 & 4). I assume then I also connect the -ve 12vDC
to
> HomeVision's Ground and the +ve 12vDC to HomeVision's
Common.
This is
> where
> I get stuck, I now have the 2 NC movement
terminals (1 & 2), where to
> these
> go? - I know back to
HomeVision, but 2 wires?
>
> Many thanks
>
Graham
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> For more information: http://www.automatedhome.co.uk
>
Post message: ukha_d@xxxxxxx> Subscribe:
ukha_d-subscribe@xxxxxxx> Unsubscribe:
ukha_d-unsubscribe@xxxxxxx> List owner:
ukha_d-owner@xxxxxxx>
> Your use of Yahoo! Groups is
subject to
http://docs.yahoo.com/info/terms/
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|