The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: help! AW10 going pop


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: help! AW10 going pop
  • From: "Roger" <roger@xxxxxxx>
  • Date: Tue, 26 Feb 2002 16:15:37 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

You should be able to replace the triac though (RS, Farnell, etc will have
something suitable)

RS

-----Original Message-----
From: kinchyuk [mailto:kinchyuk@xxxxxxx]
Sent: 26 February 2002 15:52
To: ukha_d@xxxxxxx
Subject: [ukha_d] help! AW10 going pop



Just wired up an AW10 to an 3kW immersion heater, when I tap the
switch there's a loud pop, a blue flash, and not a lot happens - the
load remains switched on whatever. The red light on the front doesn't
light at all.

Taken everything apart, wiring is fine. Any suggestions? Is 3kW a bit
much for an AW10?

Alex


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.