The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Telephone Over Cat5



Umm, easier to photograph than to explain........ (mental note, get on with
building my website :-)

The rear of my patch panel is where you connect your CAT5 to, each RJ45
socket on the front of the panel has a corresponding IDC punchdown strip on
the rear of the panel.

I'll take the example of Pin1 (as its the same for all)

Connect all 6 Pin1s together by punching down a cable into Pin1 Socket1,
then punching this cable into Pin1 Socket 2 etc., now repeat this process
for the other 5 cables and then all the sockets will be wired together.

Then take a feed from your BT socket, and connect this to one of the
punchdown areas for one of the sockets, and hey presto, you now have 6 live
extensions on your patch panel.



Daniel

-----Original Message-----
From: Stuart Booth [mailto:stuart@xxxxxxx]
Sent: 26 February 2002 15:07
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Telephone Over Cat5


On 26 Feb 02, at 14:47, James, Daniel wrote:

> Why not consider using say 6 sockets on your patch panel, and
daisychain
> them together on the rear of the panel, then from this you can patch
the
> relevant cable out to the extension, you could use more than 6

I've not seen a patch panel in the raw yet so I don't know how they
work, but does that mean you are creating 6 outlets from 1 input to
the back of the panel?

How do you do this daisychaining? (patch panelling for beginners!)

StuartB

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



***********************************************************
This message is confidential and intended for the exclusive
use of the addressee(s) only and remains the property of
Exchange FS Group plc. You should not disclose its contents
to any other person. If you are not the intended recipient
please notify the sender named above immediately.

Registered Office: Munro House, Portsmouth Road, Cobham,
Surrey, KT11 1TE. Registered in England No. 2596452
***********************************************************



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.