[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Cheapest Pronto
- To: <ukha_d@xxxxxxx>
- Subject: RE: Cheapest Pronto
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Tue, 26 Feb 2002 09:22:05 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> I've noticed that all of my AV stuff has the same button to
> power on as to power off.
> So how do you set it up to turn all your equipment on or off,
> if someone has powered
> on from the equipment itself?
What you are looking for are called "discrete codes" a code that
will
turn a piece of kit on but not off and vice versa - look on
www.remotecentral.com at the component configuration files there and you
should find most of what you need.
> Can the pronto have variables so that it can remember
> that I have powered on the amp and then configure the volume
> keys to be the amp volume
> rather than the TV volume, which it would be if just the TV was on?
No ... The pronto has no "variables" ... What I do is I have the
hard
VOL+/- and CH+/- on the TV "page" on the Pronto control the TV
but on
all other pages they control the volume on the amp and the channel +/-
on the VCR (my TV is only used as a display rather than a receiver).
Phil
Home |
Main Index |
Thread Index
|