[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: What's the REAL story with LD11's and heat?
- To: <ukha_d@xxxxxxx>
- Subject: RE: What's the REAL story with LD11's and heat?
- From: "Roger" <roger@xxxxxxx>
- Date: Sun, 17 Feb 2002 11:33:42 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
If the LD11s use a rail according to DIN EN 50022 35mm, then it is possible
to purchase the rail and mount it into a suitable enclosure (as large as
you
want) Sarel www.sarel.co.uk make pressed steel enclosures that are not too
expensive.
Roger S
-----Original Message-----
From: Tracey Gardner [mailto:tracey.gardner@xxxxxxx]
Sent: 16 February 2002 19:25
To: ukha_d@xxxxxxx
Subject: [ukha_d] What's the REAL story with LD11's and heat?
I'm also looking for the best value enclosure and would be
interested to know more about the
Hager 54 way ones.
The best that I can see in my Newey & Eyre catalogue is a 28 way
Crabtree Starbreaker Consumer Unit which would cost about 40 or
about 1.50 per way.
Tracey
"Simon Coates" <ecolume@g...> wrote:
I'm installing a similar setup to you, but using Hager 54 way
boards. I've found them to be the best/most cost effective way
to install lots of AD10s and LD11s.
Home |
Main Index |
Thread Index
|