Brian
tell
me to shut up if you have heard all this before but I have just done this
hack
so my experiences might help.
I downloaded the 7mb arf file remaned etc and
tried
rebooting the PC and the DDAR in every combination I could think
of none of them worked at
all
I could get the Manager SSOftware to see the DDAR but the DDAR just
hung
there initialising.
Eventually I went back to a known working copy of
receiver.arf (4mb so it must have had the old display server patch on
it)
I got that working with the DDARs and then patched it with the merge
thingy. This gave me a file which looks identical in size to the one I
downloaded but it works!
When you have fully powered off the DDAR for a
good
few minutes switch it back on and when it says initialising take the
meerkats
for a walk or something...the load seemed to take a long
time.
Also reboot the PC after you have done the
patch...you shouldnt need to but it may be that that was what solved
my
problems.
I think you will get the grey box with the old
display servber patch as well so seeing that may not mean you have the new
patch working.
Couple of questions you may have answered
earlier but which might clear things
up.........
1. Does your DDAR initialise properly or does it
jsut
sit there like a lemon?
2. Does the Audio software on your PC see the ddar
as
a Unit?
3. Can you ping the DDAR from your PC.. probably
teaching my maters mater to suck avian unborn
embryos but
to ping it you can type ping NNN.NNN.NNN.NNN in the run box on win 98 ME
etc
Hope this helps some but it probably
wont!
Cheers
Mick
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.