The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Cat 5 Wall Plates


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Cat 5 Wall Plates
  • From: "Ian Lowe" <ian@xxxxxxx>
  • Date: Mon, 25 Feb 2002 17:34:24 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

B&Q carry a decnt range of Philex modules in their bigger stores:
excellent
prices too!

Ian.

-----Original Message-----
From: Ben McCormack [mailto:ben.mccormack@xxxxxxx]
Sent: 25 February 2002 16:09
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Cat 5 Wall Plates


OK, I think you are right, I will go down this route

2 final questions

Any reccomendations on wall outlets?
Any recomeddations on Patch panels? (B&Q?)

Regards

ben

Regards

-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 25 February 2002 16:01
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Cat 5 Wall Plates


A krone style punch-down tool, a good one is ?14 from Craplins (BP42)
although you can use a light duty plastic one costing a couple of quid,
which is good for ten-twenty punches.. (B&Q sell a noddy one)

Nothing to be scared of :)

Ian.


-----Original Message-----
From: Ben McCormack [mailto:ben.mccormack@xxxxxxx]
Sent: 25 February 2002 15:52
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Cat 5 Wall Plates


What tool do I need to do the punching down?

-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 25 February 2002 15:46
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Cat 5 Wall Plates


I have never seen one.

Although, to be honest, It's less hassle to punch down four outlets than
it is to crimp four leads.

Ian.
-----Original Message-----
From: Ben McCormack [mailto:ben.mccormack@xxxxxxx]
Sent: 25 February 2002 15:46
To: ukha_d@xxxxxxx
Subject: [ukha_d] Cat 5 Wall Plates


Hello all

I have finally decided to install some CAT5 in the house and I have a
simple question.

I would like to fit some cat 5 outlets in the wall but i do not want to
have to punch down the connections as I am only fitting 4 outlets and I
do not want to go to the bother.

Is there any product that will allow me to plug a standard RJ45 into the
back of the wall outlet.

I hope that someone understands this

Regards

Ben


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.