The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: DDAR Hack good but...Revisited......


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: DDAR Hack good but...Revisited......
  • From: "Jon Bhargava" <jonathan.bhargava@xxxxxxx>
  • Date: Mon, 25 Feb 2002 11:47:50 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

when I put tpye in the IP address etc for the DDAR from a PC on my network, other than the DDAR server PC, it tries to connect to the internet & doesn't find the DDAR
 
Any ideas what I am doing wrong?
 
Cheers
 
Jon B
-----Original Message-----
From: Mick Furlong [mailto:hiltoneltd@xxxxxxx]
Sent: Monday, February 25, 2002 11:21
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

Yes the functionality is loaded into the DDAR so you can use the browser function >from
-----Original Message-----
From: Jon Bhargava [mailto:jonathan.bhargava@xxxxxxx]
Sent: 25 February 2002 11:02
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

I set up the hack last night & it all seems to work fine - my reciever file is 4.05MB
 
Is it possible to use the browser function from a PC that is on the same network, but not the one running the software?
 
Cheers
 
Jon B
-----Original Message-----
From: Pedro de Oliveira [mailto:p.oliveira@xxxxxxx]
Sent: Monday, February 25, 2002 10:49
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] DDAR Hack good but...Revisited......

Brian

 

As many people on this list have said before, don't worry about the file size you get.  There are people on the list who have this hack working with 3.95Mb files and up to 7Mb files, so if yours is somewhere in between that's fine.

 

HTH

Pedro

 

-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 23 February 2002 00:24
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

 

Well proceeded afresh and still have a file size of 4MB......

 

Going to bed and cry :-(((((...................

 

B.

-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 23 February 2002 00:19
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

I have just started from scratch by re-downloading the required files from the web JIC mine are corrupted in some way although this would not explain why Stuart Wyte's copy would not work.

 

I have got everything unplugged already so will in stall the files just downloaded and keep everything crossed.

 

And to answer your question, yes I have upgraded as stated by you and in the Readme.txt file, thanks anyway, actually I had already rechecked my settings to be on the safe side.

 

B.

-----Original Message-----
From: Mick Furlong [mailto:hiltoneltd@xxxxxxx]
Sent: 23 February 2002 00:06
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

Brian

 

are you sure you are putting the right parameters into the tarmerge program? Try the following steps......

 


you need to unzip the two files "tarMerge.zip" and "receiver_patch.zip" you should now have two files unzipped files called "tarMerge.exe" and "receiver_patch.arf"


Now make sure your Audio Receiver Manager Software is stopped by right clicking it and confirming that you want to stop it.

 

Now run Tarmerge.exe by double clicking it in explorer and fill in the 3 boxes (it is probably easiest to use the browse buttons to fill the first two and to browse only to the DIRECTORY for the Destination tar-file and then type in the last bit (ie. browse to "C:\Program Files\Audio Receiver\" and then type in  "receiver_new.arf" on the end of the line

 

So it should look something like the following......


  Original tar-file      : C:\Program Files\Audio Receiver\receiver.arf

  "Patch" tar-file       : C:\My Documents\DDAR\receiver_patch.arf

  Destination tar-file : C:\Program Files\Audio Receiver\receiver_new.arf

 

Note these are the directories I use yours may be different.


Now click on "Create patched tar-file" which will create the receiver_new.arf file
Nearly there now rename your original  receiver.arf to receiver_old.arf then  rename receiver_new.arf to receiver.arf (this file is 7mb in my case but may be different)

 

Just to be safe power off your ddar (by unplugging it from the mains) and reboot your PC then load the audio manager software and power on your ddar.

 

Give the DDAR a good go at loading and hopefully all will work.

 

Hope this helps.

 

Regards

Mick

 


-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 22 February 2002 23:43
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

Hmmmmm, just looking at this again, my receiver_new.arf file is still 4MB, not 7MB...............

 

Just started from scratch again and it is still 4MB......

 

Even more confused now.....

 

B.

-----Original Message-----
From: Mick Furlong [mailto:hiltoneltd@xxxxxxx]
Sent: 22 February 2002 19:23
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] DDAR Hack good but...Revisited......

Brian

 

tell me to shut up if you have heard all this before but I have just done this hack so my experiences might help.

 

I downloaded the 7mb arf file remaned etc and tried rebooting the PC and the DDAR in every combination I could think of  none of them worked at all I could get the Manager SSOftware to see the DDAR but the DDAR just hung there initialising.

 

Eventually I went back to a known working copy of receiver.arf (4mb so it must have had the old display server patch on it) I got that working with the DDARs and then patched it with the merge thingy. This gave me a file which looks identical in size to the one I downloaded but it works!

 

When you have fully powered off the DDAR for a good few minutes switch it back on and when it says initialising take the meerkats for a walk or something...the load seemed to take a long time.

 

Also reboot the PC after you have done the patch...you shouldnt need to but it may be that that was what solved my problems.

 

I think you will get the grey box with the old display servber patch as well so seeing that may not mean you have the new patch working.

 

Couple of questions you may have answered earlier but which might clear things up.........

 

1. Does your DDAR initialise properly or does it jsut sit there like a lemon?

 

2. Does the Audio software on your PC see the ddar as a Unit?

 

3. Can you ping the DDAR from your PC.. probably teaching my maters mater to suck avian unborn embryos but to ping it you can type ping NNN.NNN.NNN.NNN in the run box on win 98 ME etc

 

Hope this helps some but it probably wont!

 

Cheers

Mick

 

 



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.