The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Power triggering


  • To: ukha_d@xxxxxxx
  • Subject: RE: Power triggering
  • From: Andy Bovingdon <bov@xxxxxxx>
  • Date: Wed, 13 Feb 2002 15:23:39 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

At 03:18 PM 13-02-02 +0000, you wrote:
>not having discrete codes for power on/off.  Basically SWMBO leaves the
>system in an indeterminate state, so a one button solution ends up
turning
>TV off, amp on, SKY off etc... This is then a pain to reset everything
to a
>known state :(

I have found that most units have discrete power commands, but that
the default remotes do not use them. Check with the usual web sites
for more info (www.remotecentral.com and www.prontoedit.com). I don't
have any units that this did not apply to.


___________________________________________________________________
ANDREW  BOVINGDON   Tarantella,  Vision Park   Tel: +44 7768 877170
Director,       Cambridge,  CB4 9ZR,  UK   Fax: +44 1223 518001
Product Marketing      www.tarantella.com       bov@xxxxxxx


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.