The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: [OT]Shower Pumps


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Laptop IR


  • To: ukha_d@xxxxxxx
  • Subject: RE: Laptop IR
  • From: Andy Bovingdon <bov@xxxxxxx>
  • Date: Wed, 13 Feb 2002 14:05:48 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


Actually after both, although the question with the answer "no"
was
the main one I was getting at - suspected that was the case but
there is no harm in asking...

I guess I'll have to stop putting off that purchase of a new control
PC.

Cheers.

At 01:56 PM 13-02-02 +0000, you wrote:
>Have I misunderstood the question?
>
>girder is a program that can capture IR signals and trigger a PC to run
>or control a Windows program.
>
>What I thought Andy was looking for was a way to use a laptop's IRDA
>port to control other IR devices.
>
>The answer to _that_ question is broadly "no" - there are
_VERY_ few
>devices in the UK whose IR control mechanism is compatable with IRDA
>transmissions. Likewise there are _VERY_ few laptops whose IR ports are
>capable of tranmitting anything other than to the IRDA standard.
>
>Mark Harrison
>Head of Systems, eKingfisher
>
>************************************************************************
>****
>
>-----Original Message-----
>From: Quinten Uijldert [mailto:yahoogroups@xxxxxxx]
>Sent: 13 February 2002 12:49
>To: ukha_d@xxxxxxx
>Subject: Re: [ukha_d] Laptop IR
>
>
> > How short is short distance? My Niles IR repeaters can pick up a
> > signal from about 3m away. The laptop actually sits on top of the
> > hi-fi in a small darkened room about 1m from the IR flood
emitter.
>
>Those circumstances might be just enough to push the working distance a
>bit
>further than what would normally work. In that case you just need the
>software to capture and relay the source signals. I suggest you have a
>look
>at www.girder.nl for that. There are support forums where this question
>has
>been asked and answered many times before.
>
>HTH
>
>Q.
>
>--
>Very funny Scotty. Now beam down my clothes!
>
>
>
>For more information: http://www.automatedhome.co.uk
>Post message: ukha_d@xxxxxxx
>Subscribe:  ukha_d-subscribe@xxxxxxx
>Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>List owner:  ukha_d-owner@xxxxxxx
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
>
>
>
>________________________________________________________________________
>This email has been scanned for all viruses by the MessageLabs SkyScan
>service. For more information on a proactive anti-virus service working
>around the clock, around the globe, visit http://www.messagelabs.com
>________________________________________________________________________
>
>
>For more information: http://www.automatedhome.co.uk
>Post message: ukha_d@xxxxxxx
>Subscribe:  ukha_d-subscribe@xxxxxxx
>Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>List owner:  ukha_d-owner@xxxxxxx
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

___________________________________________________________________
ANDREW  BOVINGDON   Tarantella,  Vision Park   Tel: +44 7768 877170
Director,       Cambridge,  CB4 9ZR,  UK   Fax: +44 1223 518001
Product Marketing      www.tarantella.com       bov@xxxxxxx



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.