[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Power triggering
- To: <ukha_d@xxxxxxx>
- Subject: RE: Power triggering
- From: "Doogie Brodie" <doogiebrodie@xxxxxxx>
- Date: Wed, 13 Feb 2002 12:03:41 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> Do you know if I would be able to get HS (or HV) to 'capture'
> the LW10U signal so that when I switch it on, it will in fact
> tell it to go to 10% or something to stop the glaring lights effect?
Unfortunately, and their major downfall, is that LW10Us don't send a
signal at all. :(
This means if you use an LW10U to switch a light manually, then your
controller has no idea of the current status (unless you have some sort
of light level monitoring... :D )
To do any sorts of capturing, you're looking at an LD10 (the din rail
ones) which requires re-wiring, or I think the German version of the
LW10, but I'm sure they require a neutral, and therefore need re-wiring.
Doogie
Home |
Main Index |
Thread Index
|