[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: momentary push switches/LD11
- To: ukha_d@xxxxxxx
- Subject: Re: Re: momentary push switches/LD11
- From: Martin Greenwood <martin@xxxxxxx>
- Date: Wed, 13 Feb 2002 10:23:51 +0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
At 10:02 13/02/2002 +0000, Steve Cooper wrote:
> >>ah yes, good point, i guess therefore that my 'two-way' link
cable
> >>will not be of much use to me....i'm assuming that each switch
will
> >>need a seperate cable to the LD11. Thanks for pointing this
out.
>
>You can either have a separate wire going back to the LD10 from each
switch
>or use the link cable to put the second switch in parallel to the
first. A
>nice option is you ever want to go back to normal two way switching.
Important note.
I have got all extra switches in parallel as Steve suggests.
However in retrospect if you have a separate wire from every switch to node
0 then you can change your mind later about what each switch in the house
does, by connecting it to a different LD10 or to a controller.
Downside is even more mains wiring!!
Martin
Home |
Main Index |
Thread Index
|