[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: s-video drilling
- To: <ukha_d@xxxxxxx>
- Subject: RE: s-video drilling
- From: "John Risby" <john@xxxxxxx>
- Date: Sat, 9 Feb 2002 22:55:42 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
thanks again steve, i'll look into that.
> -----Original Message-----
> From: Steve Morgan [mailto:wormpurple@xxxxxxx]
> Sent: 09 February 2002 22:33
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] s-video drilling
>
>
> Indeed. The two part numbers I listed cover 3-12mm and
> 10-25mm respectively. So, you drill a small pilot hole and
> use the small one, changing to the large one if you need to
> go over 12mm.
Home |
Main Index |
Thread Index
|