The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: s-video drilling


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: s-video drilling
  • From: "Steve Morgan" <wormpurple@xxxxxxx>
  • Date: Sat, 9 Feb 2002 21:42:09 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I would recommend that you buy yourself a pair of decent tapered hand
reamers. RS (www.rswww.com) do a couple of nice ones (codes 600-672 and
600-688) that I have had for years and are worth they weight in gold for
this kind of work.

Cheers,
Steve

> -----Original Message-----
> From: John Risby [mailto:john@xxxxxxx]
>
> hi all,
>
> i'm currently making some wall plates for my node 0 and for
> some of the rooms in the house (finally getting round to
> sorting out the current mess). so far had no problems making
> phono and speaker plates, but having trouble with the s-video plates.
>
> my hand-drill won't take the 10mm bit i was going to use (i
> believe the s-video needs 9mm hole) and my electric drill is
> single speed (plus
> hammer) and just smashed the first plate i tried.
<snip>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.