The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Remote DDAR control - It's here and it works


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Remote DDAR control - It's here and it works
  • From: "Kenneth Watt" <kennwatt@xxxxxxx>
  • Date: Sat, 9 Feb 2002 17:49:44 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yep, I did merge them using tarmege and I still cannot see the receiver.

K.

> -----Original Message-----
> From: Justin [mailto:justin@xxxxxxx]
> Sent: 09 February 2002 17:42
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Remote DDAR control - It's here and it works
>
> Brian,
>
> you are supposed to merge the receiver_patch.arf with your existing
..arf
> file
> using the .exe in tarMerge.zip. This produces a new .arf to use.
> If you still have problems I can mail you my new .arf file.
>
> Justin.
>
> Quoting "Brian G. Reynolds"
<brian.g.reynolds@xxxxxxx>:
>
> > I'm very pleased yours works because my DDAR DOES NOT!!!
> >
> > Here's what I did,
> >
> > I went to http://empeg.dyndns.org/receiver/Feb_2002/
and downloaded
> > receiver_patch.zip,
> > I extracted this and copied the receiver_patch.arf file into the
> > C:\Program
> > Files\Audio Receiver folder, re named the existing receiver file
and
> > re
> > named the patch file to receiver.arf.
> >
> > Closed the manager re started it, removed the power to the DDAR
re
> > connected
> > the power and switched the DDAR on, nothing! just sits there
> > "initializing".....
> >
> > Bugger!
> >
> > B.
> >
> > > -----Original Message-----
> > > From: Simon Coates [mailto:ecolume@xxxxxxx]
> > > Sent: 09 February 2002 16:54
> > > To: ukha_d@xxxxxxx
> > > Subject: Re: [ukha_d] Remote DDAR control - It's here and it
works
> > >
> > >
> > > I've just done the patch for the DDAR and it's brilliant!
> > > It's so fast - no latency at all.  The browser remote is
amazing
> > > - pointing
> > > and clicking on the relevant buttons even works - even the
power
> > > button - so
> > > I can turn on the DDARs anywhere in the house and select the
music,
> > volume
> > > etc... as if I was stood next to it!
> > >
> > > This is a must for anyone with a DDAR
> > >
> > > I wonder if there'll be a patch to display the DDAR facia in
the
> > future?
> > >
> > > Simon
> > >
> > > PS. receiver.arf may be mercury.arf on some software - just
use
> > > the tarmerge
> > > software as normal but merge mercury.arf with the patch and
rename
> > > receiver_new.arf to mercury.arf.  Remember to unplug your
DDAR so
it
> > > re-initialises.
>
> ------------------------ Yahoo! Groups Sponsor
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.