[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: LEd Lights
- To: ukha_d@xxxxxxx
- Subject: RE: LEd Lights
- From: Mike Griffiths <mike@xxxxxxx>
- Date: Sat, 9 Feb 2002 11:33:38 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Thanks Ian
You don't have the part # from Rapid ?
Mike
At Home
-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 09 February 2002 11:30
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] LEd Lights
They are all single LED's. There are 8 blues and 8 greens in total with a
current draw of about 300ma. Each LED is soldered to the bell wire and has
two layers of heat shrink over it for weather protection. So far so good.
>Looks very good by the way
Thanks. Functional as well. We don't have street lights so are that much
more effective.
Ian
-----Original Message-----
From: Mike Griffiths [mailto:mike@xxxxxxx]
Sent: 09 February 2002 11:01
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] LEd Lights
Ian
Looking on your site at the LED lights you have fitted outside
How many Led's in each cluster?
Looks very good by the way
Thanks
Mike
At Home
-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 09 February 2002 10:47
To: Ukha_d
Subject: [ukha_d] For those into PIC programming
Hi everyone
A quick note to tell you about the little PIC development board I have
built. The first one is in action and being used to develop my IR stuff
now.
Essentially it is all the bits needed to run a PIC + an LCD and serial
comms. All this using only 4 I/O ports.
More details and a piccy at:
http://www.mollyology.com/WebPages/Home/Index.htm
then projects - PIC LCD
board. This is aimed at the PIC 16F84, 16F628 and other pin compatible
units. I have the LCD driver program for both the 16F84 and 16F628.
Ian
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|