The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Enron Auction


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: RS232 or RF X10?


  • To: ukha_d@xxxxxxx
  • Subject: Re: Re: RS232 or RF X10?
  • From: Martin Greenwood <martin@xxxxxxx>
  • Date: Thu, 14 Feb 2002 11:55:02 +0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

At 11:28 14/02/2002 +0000, steve.cooper@xxxxxxx wrote:
>If you have all the lights on the same house code you can select the
smart
>group checkbox on the device action page.
>
>"SmartGroup is used when the event triggers and the X10 commands
are sent
>to your devices. If this option is enabled, HomeSeer will group
together
>all devices with similar actions and located on the same housecode. The
end
>result is that all these devices will react at the same time. "


I may be wrong, but I think you can only group on/off/dim/bright commands.
So you cannot group preset commands for example to perform A3 60%, A6 90%,
A4 30%.

So scenes are very slow.

Martin




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.