The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Electronics Question...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Electronics Question...
  • From: "Ian Lowe" <ian@xxxxxxx>
  • Date: Fri, 27 Dec 2002 10:38:25 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yep Dave,
Thanks for the pointers (and thanks to all of the people who mailed me
directly!)

The circuit is an interface for controlling the K400 Curtain controller,
and
the problem seems to be twofold:

My PCB is missing two caps around the voltage regulator, and the regulator
itself is simply not powerful enough.

I'm off to craplins in a mo... wish me luck!

I.


-----Original Message-----
From: Dave McLaughlin [mailto:dave@xxxxxxx]
Sent: 27 December 2002 10:29
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Electronics Question...


Hi Ian,

What other devices are in your design? The 78L05 is only capable of
supplying 100mA max current and above this the voltage starts to drop as it
heats up.

I normally see this when using a few LED's in the circuit but not knowing
your design it does not help. There is a higher rated device in the same
package available from the likes of Farnell and RS but I can't remember off
hand what the part number is. If you need it give me a shout and I'll look
it up.

Regards
Dave...

-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 26 December 2002 18:55
To: ukha_d@xxxxxxx
Subject: [ukha_d] Electronics Question...



Been debugging one of the wackiest problems I have ever seen over the
festivities, where writing a value to EEPROM failed (although the rest of
the circuit worked perfectly) After some helpful souls trying the code out
for me, I figured out that the problem was power related. :

I'm using a 78L05 to derive a 5V supply from a 12V feed, and only getting
4.7 Volts (!!) which is great, right up until the PIC tries to do something
juice intensive, at which point, it fails..

I have tried dropping a 220u cap across the 5v-0v feed, thinking that would
give a little reserve for intensive ops, but no joy..

I don't want to bore the bits off of the list at large, so can anyone who
wouldn't mind giving a point in the right direction drop me a mail?

Ta muchly, and I hope that yesterday's dinner has largely settled by now ;)

Ian.

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.394 / Virus Database: 224 - Release Date: 04/10/2002



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.