Re: Regulated voltage higher than unregulated?

["Frank Mc Alinden" <armagh@xxxxxxx>]

Hi Tony


> (e.g. kat5's, bx24-aht etc). I've recently run out of power
sockets
> (everything runs off one power outlet with 2 x multi-sockets at
the
> moment!)

I believe that Keith does not recommend using a common power supply for
his
Kat5 units....I  would suggest you double check with Keith on this
one.............

Frank

----- Original Message -----
From: "Tony T" <tony@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Sunday, December 15, 2002 6:18 AM
Subject: RE: [ukha_d] Regulated voltage higher than unregulated?


>
>            
Normally with unregulated wall warts the unloaded
> > voltage is much higher so for instance the unregulated 9v
> > would be approx 13-14 volts...So i would say it would be ok
> > to use a regulated 12v for your 9v -10v unregulated........
>
> Thanks, Frank
>
> I'll give it a go shortly, and see what happens....
>
> I brought a couple of AT power supplies (as they have a switch,
unlike
> atx) to sit in node 0 and provide power to the various dc based
units
> (e.g. kat5's, bx24-aht etc). I've recently run out of power
sockets
> (everything runs off one power outlet with 2 x multi-sockets at
the
> moment!)
>
> Regards
> Tony
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.