The UK Home Automation Archive | ||
| Archive Home | ||
| Group Home | ||
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024 | ||||
|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: Homevision X10 Question - dead easy?
I use force commands almost exclusively and have done since I have had HV which must be 2 years now. I have not had any problems. I have to use these because of the local control I have available to keep SWMBO happy, particularly for the light switches. Ian steve.cooper@xxxxxxx urich.com To: ukha_d@xxxxxxx cc: 02/12/02 10:28 Subject: RE: [ukha_d] Homevision X10 Question - dead easy? Please respond to ukha_d >> I avoid this like the plague Steve after being told by Craig at CSI and >> Mike at LA that using the force command can cause the premature death of >> modules, particularly the appliance modules for some strange reason. :/ Thank for the advice Ken. It seems strange as I believed the force On just force HV to send an On command nothing more. I suppose continuously send an On command to an module may damage it though. Most of my set up use LD11 anyway and I do conditional lighting based around the "direct to level ##" command. S.
http://www.automatedhome.co.uk Post message: ukha_d@xxxxxxx Subscribe: ukha_d-subscribe@xxxxxxx Unsubscribe: ukha_d-unsubscribe@xxxxxxx List owner: ukha_d-owner@xxxxxxx List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/ Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|