RE: Color kinetics

["Chris Bond" <chris@xxxxxxx>]

Dare I ask if we've got any more news when we can get your board into
production - im quite keen to get them built - with the latest xap spec
would be even better.

Kind Regards,
Chris Bond

-----Original Message-----
From: Ian Davidson [mailto:ian@xxxxxxx]
Sent: 06 November 2002 8:02 PM
To: ukha_d@xxxxxxx Subject: Re: [ukha_d] Color kinetics

OK - The controller I built is still in its rat nests form but still
working
fine.

I started to look at adding some sort of RS232 control so that if it
came to
it a could produce one pcb to be used either as a standalone controller
or a
RS232 controller.

I also took another look at the xAP happenings. There is PIC code
available
by the other Ian's in the group for xAP on a PIC. However the PIC sits
there
constantly looking at the serial stream and when it receives the correct packet actions the request. I need to keep the DMX o/p going all the
time.
It is beyond a small PIC to o/p DMX and monitor and decode a RS232
stream.
Although I could increase the PIC to a more powerful unit it will still
mean
writing some fancy interupt routines. The easiest way is to use two
small
PIC's (only adds =A31.45 on to the cost) and let them talk at the
appropriate
time.

There seems to have been a change in the xAP protocol recently and also
mention of PIC code to handle xAP on its own. I was going to post to the xAP
group but they have seemed quite busy of late with the protocol changes
etc.
So for the time being the project is holding. I would be interested if
anyone has any ideas on this or if anyone form the xAP group would like
to
comment ?

Ian D


> Any news on the DMX controller ya built?
>
> -----Original Message-----
> From: Ian Davidson [mailto:ian@xxxxxxx]
> Sent: 06 November 2002 7:24 PM
> To: HA Yahoo group UK
> Subject: [ukha_d] Color kinetics
>
> Hi All
>
> I had been holding off posting hoping to have some more news by now. I=
> spoke to the supplier again today, he asked me to phone again next
> Tuesday so I'll hold off until then to see if I can finally get the > remaining units.
>
> Ian D
>
>
>
> [Non-text portions of this message have been removed]
>
>
> http://www.automatedhome.co= .uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
> http://grou= ps.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/in= fo/terms/
>
>
>
> http://www.automatedhome.co= .uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
http://groups.ya= hoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/te= rms/
>
>
>



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.ya= hoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/te= rms/

Yahoo! Groups Spons= or

ADVERTISEMENT
=

http://www.automatedhome.co.uk 
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.