The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: IPAQ Bulk


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

X10 resetting of remote PC's


  • To: <ukha_d@xxxxxxx>
  • Subject: X10 resetting of remote PC's
  • From: "Matthew Norman" <mafiu@xxxxxxx>
  • Date: Tue, 6 Aug 2002 22:55:39 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Just thinking.  My server is in Node 0+ (the loft) plugged into an AM12.  If the machine hangs I can turn the AM12 off and thereby reboot it.
 
Now I've since acquired a UPS that I want to protect the server and log power levels.  Trouble is if I reset the AM12 it will just make the UPS beep and not reset the machine.
 
When you trigger an AM12 you get a hefty click which implies a relay.  I was wondering if I could connect the relay side of the AM12 to the reset switch of the PC, thus making a remote finger to press the reset button.  I first though about making a plug with a mains operated relay in that I could plug into the AM12 socket but then thought that this is a bit overkill when theres already a relay being triggered. 
 
I suppose theres mains voltage on the switch terminals of the AM12 relay by default so I would be careful - would have to isolate all but the coil from mains - any one tried a modification to do what I'm asking - or anyone doing anything like that or come up with any other solutions?
 
Matthew
 

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.