Re:X10 - unexplained TM13 problem

["Andrew Woolass" <andrew@xxxxxxx>]

Date: Fri, 30 Aug 2002 13:05:33 -0000
   From: "garygfx" <garygfx@xxxxxxx>
Subject: X10 - unexplained TM13 problem

I have a "socket rocket" lamp module assined to A5 which used to
work
with my X10 remote and TM13U. For the past day it no longer responds
to A5 commands from the remote, nor from a MS13 sensor also set to A5.

However, all other modules respond correctly using the remote and I
can issue a All Lights On command and the socket rocket *will*
respond to that and also A5-ON/OFF commands via my PC.

Any ideas as to what could be at fault please?

TIA,
Gary.




________________________________________________________________________
Gary

IMHO TM13u are misserable things

Try switching it off (ie kill the power to it) leave 30ish seconds and
try
it again.

Are you sure batteries in MS13 ok ?

I have heard that if left untriggered by rf these things hangup,
usually
MS13 is enough to keep it "alive"

I have one with MS13 works no problem (thats tempted fate!)
and one with no MS13 just HR10 which hangs up at least weekly
pluging TM13 into an appliance module (AM10) and switching that module
off/on once a day is a suggested solution.

Andy
Dazed but not Defeated!

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.