The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: xAP - The Proposed Architecture Explained...


  • To: ukha_d@xxxxxxx
  • Subject: RE: xAP - The Proposed Architecture Explained...
  • From: ian.bird@xxxxxxx
  • Date: Thu, 15 Aug 2002 10:36:18 +0200
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Tony

In an RS485 network the term multidrop and daisy chain go hand in hand.
Think of a single piece of two strand cable running round the various rooms
of the house. When you want to add a device to it you just crimp the
connections to the main wires. Note there are no T junctions and as small as
possible a neck to the device. Add on loads of devices and you have multi
drop. The devices at each end have termination resistors on to stop signal
reflections but that is getting techy.

HTH

Ian

Ciba Vision (UK) Ltd
Tel:+44(0)1489 775570
Fax:+44(0)1489 779570
E mail: ian.bird@xxxxxxx

> -----Original Message-----
> From: BUTLER, Tony, FM [mailto:roaming@xxxxxxx]
> Sent: 15 August 2002 08:24
> To: 'ukha_d@xxxxxxx'
> Subject: RE: [ukha_d] xAP - The Proposed Architecture Explained...
>
>
> > > So the displays are connected in a daisy chain to the controller?
> >
> > No multi drop
>
> Sorry for being thick here - could you explain multi drop to me?
> The only contect I have seen it used in before is in relation to KAT5
> modules and a "multidrop" installation there _is_
> daisy-chained, 10base-T
> style......
>
> thanks,
>
>
> Tony
>
>
> ********************************************************************
>       Visit our Internet site at http://www.rbsmarkets.com
>
> This e-mail is intended only for the addressee named above.
> As this e-mail may contain confidential or privileged information,
> if you are not the named addressee, you are not authorised to
> retain, read, copy or disseminate this message or any part of it.
> The Royal Bank of Scotland is registered in Scotland No 90312
> Registered Office: 36 St Andrew Square, Edinburgh EH2 2YB
>              Regulated by the Financial Services Authority
> ********************************************************************
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> 4 DVDs Free +s&p Join Now
> http://us.click.yahoo.com/pt6YBB/NXiEAA/RN.GAA/IBOolB/TM
> --------------------------------------------------------------
> -------~->
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>


Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.