|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: Re: Geovision Software |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Veronica FM transmitters - anyone had any problems?
When I got mine, I got the ready made PCB not the one in the case
etc....
I plugged a 9v battery in and the audio source and proceeded to tune
the
radios in.
I got around 400yard radius on that battery, clear as crystal.... (Went
round the block in the car)
Have you tried unplugging the audio source? You should just get silence
on
that frequency as it is still transmitting only nothing!!
HTH
Neil
-----Original Message-----
From: Lee Varga [mailto:lee@xxxxxxx]
Sent: 01 August 2002 08:49
To: ukha_d@xxxxxxx
Subject: [ukha_d] Veronica FM transmitters - anyone had any problems?
While I'm waiting for the Veronica to respond, I thought I'd ask the
collective if they've had any problems...
I got mine ready-built last week, plugged it in expecting an Instant
Solution (tm), but was very disappointed with the results, limited
range,
the source appeared at multiple frequencies on the radio, with a nasty
(maybe mains) hum over it, and I could only tune it on an analogue
radio,
the digital tuners couldn't find a thing (due to the stepping(?) I
guess).
All in all, a most disappointing experience - any ideas/solutions?
TIA
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|