RE: loftbox - FAO Ken Watt

["Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>]

Robert,

Since Ken's works without using a digibox at all, maybe it's not the
RF2
power that's the problem. I realise it's a right-royal PITA, but can
you
move your digibox and a TV to the loftbox location (the loft ? ;-) ) and
try
it out there with some really short cables ? At the least it should
prove
whether the loftbox unit is faulty, or there's another problem.

Tim H.

> -----Original Message-----
> From: Hawes,Timothy Edward (GEG)
> 
> 
> Robert,
> 
> I've seen your drawings and provided your system is connected 
> as shown, I
> don't understand why it doesn't work, unless it's to do with 
> the RF2 power.
> Since the sketch on the LA site shows the digilink units on 
> top of the TVs
> and the digilink requires RF2 power to be enabled, maybe you 
> *should* turn
> the power on. Maybe the loftbox assumes you've turned the 
> power on because
> you want to use the remote control feature. I'm guessing it 
> doesn't matter
> to the loftbox (i.e. won't do any damage) if the RF2 power is 
> on, but you
> don't (yet) have the digilinks installed. Clutching at staws 
> now, but I
> assume you've plugged the loftbox PSU into the mains etc. ;-)
> 
> 
> Ken,
> IIRC you have/had a loftbox - do you have to enable the 
> digibox's RF2 power
> to get it to work ? TIA.
> 
> HTH,
> 
> Tim H.
> 

+

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.